Turck Electrical Items in Pakistan

A sensor is only half of a connection. The other half is the cordset, and Turck’s part numbers use different naming for each, so it’s easy to order a sensor and a cable that don’t fit, or a PNP sensor for an NPN input card.

HAT INDUSTRIES helps businesses across Pakistan identify and source Turck sensors and connectivity components. We are not an authorized Turck distributor or stockist. Every order is sourced on request through established, authorized channels, and we confirm the full part number or ID number with you before ordering.

Turck M12 Cordsets: Reading the Name

PrefixMeaning
RK / RKCFemale M12 connector, straight
WK / WKCFemale M12 connector, angled (right angle)
RSCMale M12 connector, straight
4.4T4-pin connector, 4 wires
-2, -5, -10Cable length in metres
/TXL, /TELCable jacket: TXL = PUR, TEL = PVC

M12 cordsets on this list are rated 250 V and 4 A.

Verified Cordset Examples

Part NumberID / Alt. No.Description
RKC4T-2/TEL6625010Female straight to open end, 3-wire, 2 m, PVC
RKC4T-5/TEL6625011Female straight to open end, 3-wire, 5 m, PVC
RKC4T-5/TXL6625501Female straight to open end, 3-wire, 5 m, PUR
RKC4.4T-2/TXL6625503Female straight to open end, 4-wire, 2 m, PUR
RKC4.4T-5/TEL6625014Female straight to open end, 4-wire, 5 m, PVC
WKC4.4T-P7X3-2/TXL6626174Female angled, 4-wire, 2 m, PUR
RKC4.4T-2-RSC4.4TU5264Double-ended extension, male to female, 4-wire, 2 m
RKC 4.4T-10-RSC 4.4TU5194-10Double-ended extension, male to female, 4-wire, 10 m

Choose PUR (TXL) for cables that flex or touch oil and abrasion, and PVC (TEL) for fixed wiring. Choose the angled version where space behind the sensor is tight.

Sensors That Use These Cordsets

Part NumberID No.TypeKey Specs
BI15-M30-VP4X-H11414570710Inductive15 mm flush, 10–65 VDC, PNP, M12 connector, IP67
BI15-M30-AP6X-H114146185Inductive15 mm flush, 10–30 VDC, PNP N.O., M12 connector
BI15-M30-VP4X4570713InductiveSame family, cable version
BC10-M30K-VP4X-H11412503035Capacitive10 mm flush, 10–65 VDC, PNP, M12 connector, IP67
BC10-M30-VP4X25020Capacitive10 mm, 2 m cable version

The “-H1141” ending means the sensor has an M12 connector. Without it, the sensor has a fixed cable and doesn’t need a cordset. Inductive sensors detect metal. Capacitive sensors also detect non-metals such as plastics, liquids and powders.

Three Checks Before You Order

CheckWhy It Matters
PNP or NPNThe output type must match your PLC input card
Supply voltageThese sensors run on a DC supply (10–30 or 10–65 VDC), so 24 V DC is the usual panel rail
Connector or cableAn “-H1141” sensor needs a mating M12 cordset

Frequently Asked Questions

What is an ID number and why do you ask for it?
Turck gives each product a type name and a numeric ID. Sending both removes any doubt about the variant.

Can I use any M12 cordset with a Turck sensor?
Check the pin count and wiring. A 4-pin M12 connector is common, but confirm the pin-out for your sensor.

What’s the difference between BI and BC sensors?
BI is inductive (metal only). BC is capacitive (metals and non-metals).

Do you keep these in stock?
No. We source on demand and confirm availability, pricing, and lead time before you commit.

Request a Quote

Send us the part number or ID number from your existing sensor or cordset, or describe your application (target material, mounting, supply voltage, cable length), and HAT INDUSTRIES will confirm the right match, availability, and pricing.